FT-1012 Latest EPS cutting Machine
Features of FT-1012 EPS cutting Machine
1.Styrofoam structurer machine body allow you put thick
materials,table middle is lower again,
2.Desktop machine body is easy for you to put heavy stone on its
table
3.lathe bed weled with thick channel and square tubes,good
stability,no deformation.
4.with stainless steel sink and double water cooling system,high
efficient works
5.not only for EPS foam cutting,also very suitable for stone
engraving.
Application of FT-1012 EPS cutting machine
- stoneworks:3D/2D engraving,embossment,line engraving cutting,edge
inversing,drill on nature stones,granites,marbles,artificial
stones,tombstones,milestones,ceramic,etc
- Die industry:copper sculpture,aluminum engrave,metal molds,plastic
sheeting,PVC,etc.
Parameters of FT-1012 EPS cutting machine
NO. | Description | FT-1012 EPS cutting machine |
1 | Working area | 1000*1200*700mm (39.2*47.2*27.5inch) |
2 | Table size | 1200*1800mm (47.2*70.8inch) |
3 | Transmission | linear guideway,rack opinon |
4 | Table structure | T Slot |
5 | Spindle power | 3KW water coolen |
6 | Spindle speed | 24000r/min |
7 | Travelling speed | 17m/min |
8 | Working speed | 10m/min |
9 | Working Delicacy | 0.005mm |
10 | Repositioning Accuracy | 0.05mm |
11 | Driving Motor | Stepper |
12 | Control System | Ncstudio(or DSP system) |
13 | Command Code | G Code*.u00*.mmg*.plt |
14 | Power(without spindle) | 1500W |
15 | Voltage | AC380/50HZ |
16 | Running Environment | Temperature:0 degree~45 degree |
17 | Software | Artcam/type3/Artcut or CAM software |
Different angle images
Samples photos
Contact me
skype:lily.touchsky
Gmail:lily.touchsky@gmail.com
Yahoo:flytechcnc@yahoo.com
Cell:86-18654538900
www.ft-cncrouter.com
